Advances in data centre design and delivery | Jaimie Johnston MBE | Autodesk University 2024

The Torque-Drive head is more powerful than the direct-drive head.

Once the hair has been cut, pull it away from the brush by hand.. (Optional) Wipe away dirt and grime with a damp cloth.If you want to give the brush a more thorough clean, use a damp, soft cloth to wipe away dirt (avoid cleaning products or detergents – just use plain water).

Make sure that the brush is completely dry before re-inserting it into the vacuum though, otherwise more dirt will instantly stick to it.. Re-insert the brush bar into the vacuum.. You’ll need to insert the end of the brush opposite the side with the button first.Once that end has been inserted, gently push the brush until you hear a satisfying click..Remember to replace the battery!.

Keep in mind that the red lights indicating a blockage won’t switch off straight away.It’ll take around 10 seconds for the lights to go out and the vacuum to restart after the jam has been resolved.. Related Article:.

How to Empty The Gtech Multi Mk2.

What Should I Do If The Brush Still Won’t Spin?.In this article, we’ll go through a method that uses nothing more than water and white vinegar..

This article is about removing damp smells from small patches of carpets.If your home has been flooded, or is very damp, then you’ll need to contact a professional.. What Causes Carpets to Smell Damp?.

When a carpet gets wet, a damp smell can happen if it isn’t allowed to properly dry.This can be due to a variety of reasons.. A damp smell is common after carpet cleaning, especially if the cleaner wasn’t able to extract the water used during the cleaning process.